Swanson Tool TC132 12-Inch Combo Square Cast Zinc Body, Stainless Steel Ruler and Brass Bolt

Tools & Home Improvement

Swanson Tool TC132 - Stainless steel blades with black etchings, includes brass hardware. Brass bolt spring-loaded blade assures firm, accurate settings. Swanson tool tc132 12-inch combo square cast zinc body, Stainless Steel Blade and Brass Bolt, Brass bolt spring-loaded blade assures firm, accurate settings Die-cast zinc body.

With brass scriber and level impact-resistant acrylic vial.

More information about Swanson Tool TC132

Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | Inch/Fractions/Millimeter Conversion


Grace Marketing- HI 01407A - But an accurate measurement is meaningless if you can't read it accurately. Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 00005" / 1/128" / 001mm; accuracy: 0001" / 002mm. Stainless steel: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use.

Easy read visibility: extra large LCD screen for easy and clear reading. Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value. Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. Machine-grooved thumb-roll mechanism and position lock for sure adjustment.

Neiko 01407A Electronic Digital Caliper Stainless Steel Body with Large LCD Screen | 0 - 6 Inches | Inch/Fractions/Millimeter Conversion - When you require exact measuring, you reach for a caliper. This caliper takes an essential tool into the 21st century with an extra-large LCD digital readout for exact internal and outside measurements accurate to. 001-inch. Versatility: measure inside, outside, depth and step with two sets of jaws and the probe.

Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. Instantly converts from SAE or Metric, the display can be zeroed at any point on the slide.

More information about Grace Marketing- HI 01407A


Similar products



Swanson Tool S0101CB Speed Square Layout Tool with Blue Book and Combination Square Value Pack


Swanson Tool S0101CB - Swanson 7-inch speed Square is made in the USA from aluminum alloy. The swanson speed square with Blue Book and Combination Square Kit is an excellent value. Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. It include one made in the usa 7" swanson speed square, one Swanson Blue Book; a 62-page pocket sized booklet that provides vital instructions, reference diagrams and tables for the construction of roofs and stairs and one 6" professional combination square.

Speed square can be used as try square, protractor, saw guide, miter square, line scribe and more.62-page blue book provides vital instructions, reference diagrams, and tables for the construction of roofs and stairs. This is a great kit for contactors and Dyers alike. 6" combination square features precision machined stainless steel straight edge and cast zinc body.

Swanson Tool S0101CB Speed Square Layout Tool with Blue Book and Combination Square Value Pack - Combination square can be used as Miter Square, Try Sqare, Line Scribe, Depth Finder and more. Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value. Easy read visibility: extra large LCD screen for easy and clear reading. Versatility: measure inside, outside, depth and step with two sets of jaws and the probe.

Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 0

More information about Swanson Tool S0101CB


Similar products



Swanson Tool S0101 7-inch Speed Square Layout Tool with Blue Book


Swanson Tool S0101 - Incorporates features of framing square, tri square, mitre square, and protractor square. Constructed of aluminum alloy. Easy read visibility: extra large LCD screen for easy and clear reading. Versatility: measure inside, outside, depth and step with two sets of jaws and the probe. Swanson 7-inch speed Square is made in the USA from aluminum alloy.

Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value. 6" combination square features precision machined stainless steel straight edge and cast zinc body. Combination square can be used as Miter Square, Try Sqare, Line Scribe, Depth Finder and more.

Swanson Tool S0101 7-inch Speed Square Layout Tool with Blue Book - 7-inch speed square; fits in pocket. Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 00005" / 1/128" / 001mm; accuracy: 0001" / 002mm. Stainless steel: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use.

Speed square can be used as try square, protractor, saw guide, miter square, line scribe and more.

More information about Swanson Tool S0101


Similar products



Swanson SW1201K 7" & Big 12" Speed Square Layout Tool Kit without Layout Bar


Swanson Tool SW1201K - Heavy gauge aluminum alloy construction. Swanson 7-inch speed Square is made in the USA from aluminum alloy. Made in the USA. Includes 44-page Swanson Blue Book. 1/4 inch spaced notches to facilitate scribing lines. The swanson tools speed square is an american, triangular-shaped, carpenters' layout out tool which combines some of the most common functions of a try square and framing square into one.

Try square, miter square, Saw Guide, Line Scriber and Protractor. Made in the USA. 7 inch and 12 inch Speed Squares included. Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 0

Swanson SW1201K 7" & Big 12" Speed Square Layout Tool Kit without Layout Bar - 0005" / 1/128" / 001mm; accuracy: 0001" / 002mm. Stainless steel: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use. The speed square is 5 tools in 1. It is used to make basic measurements and mark lines on dimensional lumber and may be used as a saw guide for making short 45 and 90 degree cuts.

More information about Swanson Tool SW1201K


Similar products



Starrett RS-24 Steel L-Shaped Rafter/Framing Square, 24" x 16" Length


Starrett RS-24 - Versatility: measure inside, outside, depth and step with two sets of jaws and the probe. Speed square can be used as try square, miter square, saw guide, protractor, line scribe and more.62-page blue book provides vital instructions, reference diagrams, and tables for the construction of roofs and stairs.

Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value. Heavy gauge aluminum alloy construction. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" are on the back. Incorporates features of framing square, tri square, mitre square, and protractor square.

Starrett RS-24 Steel L-Shaped Rafter/Framing Square, 24" x 16" Length - Constructed of aluminum alloy. Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. The body of the square is 24" long and 2" wide and the tongue is 16" long and 1-1/2" wide. The rs-24 is a standard L-shaped square with a solid, one-piece construction. 1/4 inch spaced notches to facilitate scribing lines.

Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 00005" / 1/128" / 001mm; accuracy: 0

More information about Starrett RS-24


Similar products



Starrett FS-24 Steel Professional Framing Square, 24" x 16" Length


Starrett FS-24 - Heavy gauge aluminum alloy construction. Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. The face and back are permanently stamped with 1/8" graduations. The fs-24 professional one-piece tempered steel framing square features permanently stamped 1/8" graduations on both sides.

The fs-24 professional framing square has a one-piece tempered steel 24" x 2" body and a 16" x 1-1/2" tongue. Easy read visibility: extra large LCD screen for easy and clear reading. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" are on the back. The body of the square is 24" long and 2" wide and the tongue is 16" long and 1-1/2" wide.

Starrett FS-24 Steel Professional Framing Square, 24" x 16" Length - Swanson 7-inch speed Square is made in the USA from aluminum alloy. 1/4 inch spaced notches to facilitate scribing lines. 6" combination square features precision machined stainless steel straight edge and cast zinc body. Combination square can be used as Miter Square, Try Sqare, Line Scribe, Depth Finder and more.

7-inch speed square; fits in pocket. Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value. Incorporates features of framing square, mitre square, tri square, and protractor square.

More information about Starrett FS-24


Similar products



POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece


Southern Technology LLC 71009 - The body of the square is 24" long and 2" wide and the tongue is 16" long and 1-1/2" wide. 1/4 inch spaced notches to facilitate scribing lines. Orange color ensures high visibility. The face and back are permanently stamped with 1/8" graduations. 6" combination square features precision machined stainless steel straight edge and cast zinc body.

Combination square can be used as Miter Square, Try Sqare, Line Scribe, Depth Finder and more.7-inch speed square; fits in pocket. A clear coating helps prevent rust. 7 inch and 12 inch Speed Squares included. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" are on the back. Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 0

POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece - 0005" / 1/128" / 001mm; accuracy: 0001" / 002mm. Stainless steel: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use. Easy read visibility: extra large LCD screen for easy and clear reading. You'll have exactly what you need to get the job done - safely, effectively, and easily! Three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter.

More information about Southern Technology LLC 71009


Similar products



Swanson T0108 Big 12 Speed Square Layout Tool with Blue Book


Swanson Tool T0108 - 1/4 inch spaced notches to facilitate scribing lines. Matte finish to prevent glare. 6" combination square features precision machined stainless steel straight edge and cast zinc body. Combination square can be used as Miter Square, Try Sqare, Line Scribe, Depth Finder and more.7-inch speed square; fits in pocket.

Heavy gauge aluminum alloy construction. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" are on the back. Speed square can be used as try square, protractor, miter square, saw guide, line scribe and more.62-page blue book provides vital instructions, reference diagrams, and tables for the construction of roofs and stairs.

Swanson T0108 Big 12 Speed Square Layout Tool with Blue Book - Easy read visibility: extra large LCD screen for easy and clear reading. Made in the USA. The square features rafter information and an octagonal measuring scale on the front. Swanson 7-inch speed Square is made in the USA from aluminum alloy. Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value.

Swanson t0108 12 speed square three measuring modes: one button quick change between three measuring modes: inch, fractions, millimeter. Great for deck framing and stairway building! Tough, durable plastic design for long lasting use; Rubber soles firmly grip your workpiece.

More information about Swanson Tool T0108


Similar products



Stanley 45-912 8 Inch X 12 Inch Steel Carpenter'S Square


Stanley 45-912 - Prevents kickback and protects hands and fingers from sharp cutting blades. Great for deck framing and stairway building! The fs-24 professional framing square has a one-piece tempered steel 24" x 2" body and a 16" x 1-1/2" tongue. Made in the USA. Heavy gauge aluminum alloy construction. Tough, durable plastic design for long lasting use; Rubber soles firmly grip your workpiece.

. The square features rafter information and an octagonal measuring scale on the front. Heavy gauge aluminum with matte finish to prevent glare. Includes 60-page Swanson blue book of instructions. The face and back are permanently stamped with 1/8" graduations. Precision | accuracy: measurement range: 0 - 6" and 0 - 150mm; resolution: 0

Stanley 45-912 8 Inch X 12 Inch Steel Carpenter'S Square - 0005" / 1/128" / 001mm; accuracy: 0001" / 002mm. Stainless steel: finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use. Bonus: extra replacement LR44 battery along with one battery included and custom fit storage case included for better value.

More information about Stanley 45-912


Similar products



Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings


Swanson Tool TS149 - Limited Lifetime Manufacture Warranty. Made in the USA. Heavy gauge aluminum with matte finish to prevent glare. Plain gradations. Treated with a clear, protective finish that resists rust. Brass binding eliminates twisting. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" are on the back.

The face and back are permanently stamped with 1/8" graduations. Easy read visibility: extra large LCD screen for easy and clear reading. 1/4 inch spaced notches to facilitate scribing lines. Speed square can be used as try square, miter square, saw guide, protractor, line scribe and more.62-page blue book provides vital instructions, reference diagrams, and tables for the construction of roofs and stairs.

Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings - The fs-24 professional framing square has a one-piece tempered steel 24" x 2" body and a 16" x 1-1/2" tongue. Swanson 7-inch speed Square is made in the USA from aluminum alloy. This finely crafted tool has been designed primarily for the most discriminating woodworkers. Brass bound ends. Matte finish to prevent glare.

The square features rafter information and an octagonal measuring scale on the front.

More information about Swanson Tool TS149


Similar products

Previous
SimpacX RFID Blocking Bifold Slim Genuine Leather Thin Minimalist Front Pocket Wallets for Men Money Clip Full Grain Leather
Next
SmartDealsPro 6-Pack White Intermediate E17 Base to Candle Candelabra E12 Base Light Fixture Bulb Socket Adapter Reducer
Euqituo is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.